Accessories
These additional accessories help customize your Power Screen to fit your needs beyond the ordinary! Going out of town and want to give the impression of an occupied home? Prefer your solar screen to lower automatically at sunset? During breezy conditions, wouldn’t it be convenient if the screen rolled itself up? With the Soliris, Eolis, and Chronis Sensors and Timers, you have to option to command your power screen to do any one of those things by simply programming the transmitter!
Soliris 24V Sun and Wind Sensor
- Sun intensity and wind speed thresholds can be set right on the sensor
- Soliris will command the motor to roll the screen up or down as needed, via a radio signal
- Includes a 24V DC transformer to provide power
- No additional wiring is needed
- Can be hard wired or plugged into an outlet
- Radio range up to 65 ft
- Can operate a single unit or multi units (multi units will operate as a group)
- Compatible with standard Hertz motors included with motorized screen
|
|
 |
Eolis 24V Wind Sensor
- Wind speed threshold can be set right to the sensor
- Eolis will command the motor to roll a screen up or down as needed, via radio signal
- Includes a 24V DC transformer to provide power
- No additional wiring is needed
- Can be hard wired or plugged into an outlet
- Radio range up to 65 ft
- Can operate a single unit or multi units (multi units will operate as a group)
- Compatible with standard Hertz motors included with motorized screen
|
|
|
Chronis RTS Timer
- Will automatically raise and lower screen based on pre-set time of day
- Programmable for the same time each day, or different times every day
- Security function raises/lowers screen randomly implying an occupied home
- No plugs or external wiring needed
- Operates on 2 AAA batteries
- Can also be used as a regular remote control
- Radio range up to 65 ft
- Optional light sensor, so automation can be determined by sun levels (Chronis Lite)
- Compatible with standard Hertz motors included with motorized screen
- Face mounting design
|
|
|
Digital HZ Keypad
- For home owners looking for more secure entry
- Operates much like a remote control sending out a radio signal at the touch of a button, with no wiring required.
- This option should be considered a security deterrent but by no means will it prevent entry.
- This must be used in conjunction with a remote. The remote is essential to initially program the motor, and the key pad is added afterwards. Then you can simply put the remote away in a drawer once the motor is programmed.
- The key pad has 2 channels. Each channel can operate ONE unit individually. If you have more than 2 units, and want key pads for all the units, you will have to purchase one key pad for every 2 motorized screens they have.
Key Chain Remotes
- Much like a garage door opener or vehicle remote
- Available immediately in a 2 channel or 4 channel style and are compatible with Hz 2 and Hz 2 Plus style motors.
- Attach easily to any key chain. (does not include key ring)
|
|
 |
Very pleased with our new screen and the service that Jay did. Can't wait to tell and show our friends! 